Path:Home >> Resources >> Mold Standard

Mold Standard

International Standard
  AISI DIN< LOCAL/ (JIS)<
unit IN/LB MM/KG MM/KG
moldbase DME HASCO LKM/FUTABA
steel H13
420
P20
D2		 1040
S-7
A2		 1.2344
1.2083
1.2311
1.2739		 1.2343
1.1730
1.2510
1.2767		 NAK55,NAK80,DC11
LKM818H,LKM738H
LKM420,LKM2344
component DME HASCO LKM
knock out location 7",4x16",6x28" 200,100 x 400 200,100 x 400
British standard pipe thread NPT MM/BSP MM
location ring ⊄4.000" ⊄100/110/125MM ⊄100MM
Sprue radio R1/2",R3/4" R10, R15,R40,90° R15,R40
thread UNC MM MM
ejector pin DME HASCO  
sleeve pin DME HASCO  
spring(pressure ratio) ASSOCIATE DAIDO,HASCO ASSOCIATE DAIDO
hot runner INCOE,DME,Husky,Mastip HASCO,Synventive, Mold-Master,thermoplay Yudo or local
hydraulic cylinder MILLER/PARKER PARKER Taiwan or local
gear DP "module"-MM "module"-MM
Texture Mold-tech Mold-tech Yixin or other local
Including following process categories
 
Copper acid, cyanide
Chrome trivalent bright, TriStar EbonyTMblack
Nickel bright, semi-bright, particle, satin, electroless
Tin bright, matte, immersion, tin/lead, tin/zinc
Zinc chloride, alkaline non-cyanide, cyanide
Zinc Alloy zinc/cobalt, zinc/iron, zinc/nickel
Passivates/Chromates trivalent clear, black; hexavalent yellow, black
Miscellaneous topcoats
phosphates
cleaners – soak, electro
water treatment